SWR Wall-Mounted Single Phase Relay Voltage Stabilizer
Reliable voltage protection with electromagnetic relay switching technology. Ultra-fast <60ms response time, wide input voltage capability, and reliable performance for general applications.
YIY comprehensive Relay voltage stabilizer lineup offers solutions from 500VA to 3000KVA for all power protection requirements.





Selection guide
A relay stabilizer switches between transformer taps with electromagnetic relays controlled by a microcontroller. Correction happens in steps, so the output stays inside a band rather than at a fixed point: ±8–10% on the AVR series and ±10% on TRS, SWR and PR. There is no brush or motor to wear, and switching is fast. The AVR page lists a 60ms response time.
That combination makes relay the practical choice for single-phase homes, shops and offices where appliances already tolerate a ±10% band. Every relay model YIY lists is single-phase, rated from 500VA to 20kVA.
Choose the format next. PR is a plug-in portable unit for one appliance (500–2000VA, 1.3–1.8kg net). AVR covers desktop and tower installs from 500VA to 20kVA with three input windows. TRS and SWR are wall-mounted mainline units from 0.5kVA to 20kVA with MCU overload cut-off at 120% and 98% AC-AC efficiency.
| Model | Format | Ratings | Input range | Output |
|---|---|---|---|---|
| PR Portable Relay Stabilizer | Portable | 500–2000VA (250–1000W) | 125–270V / 140–260V | 220V ±10% |
| AVR Single-Phase Relay Stabilizer | Desktop / tower | 500VA–20kVA | 70–270V / 90–270V / 140–260V | 220V ±8–10%, 60ms response |
| TRS Wall-Mounted Relay Stabilizer | Wall-mounted | 0.5–20kVA | 90–270V; 70–270V (3–20kVA); 45–270V (5–20kVA) | 220V / 230V ±10% |
| SWR Wall-Mounted Relay Stabilizer | Wall-mounted | 0.5–20kVA | 90–275V; 45–275V (5kVA+) | 220V / 230V ±10% |
Values copied from each product page’s specification table. Efficiency listed: TRS and SWR 98%, AVR and PR 95%.
TRS and SWR wall-mounted units from 5kVA to 20kVA sit at the incoming supply and cover the whole home or shop. The 45V-start versions suit areas with deep voltage sags.
PR portable units (250–1000W output) and small AVR models protect one refrigerator, TV or workstation without rewiring.
Shops, classrooms and site offices use AVR tower models up to 20kVA where lighting, IT and refrigeration share a single-phase feed.
Product pages list carton quantities: AVR ships 8, 4 or 2 units per carton depending on rating, and PR ships 9 per carton. That makes container planning for retail programmes straightforward.
TRS 5–20kVA models list 45–270V input, and SWR models of 5kVA and above list 45–275V. Standard versions start at 90V.
Wall-mounted TRS and SWR units suit fixed mainline installation up to 20kVA. AVR desktop and tower units suit plug-in or floor installation, and PR suits a single portable appliance.
On a 220V system ±10% means 198–242V. Most household appliances are rated for that band. If the equipment datasheet asks for a narrower range, use a servo model (±2–3%) instead.
The tables list output power below the VA rating. For example, AVR 1000VA delivers 800W and PR 1000VA delivers 500W, so size by watts.
Yes. TRS and SWR list 220V or 230V output, and branding, labels and packaging are handled through YIY OEM/ODM programmes. Since 2008, YIY has built Servo, Relay and IGBT stabilizers in a 30,000 m² plant with 300+ staff, producing 1,000,000+ units a year for buyers in 130+ countries.
A: A relay voltage stabilizer uses electromagnetic relays to switch between different transformer taps in response to input voltage changes. When the input voltage fluctuates outside the acceptable range, the control circuit activates the appropriate relay to select a different transformer tap, adjusting the output voltage back to the desired level. This switching happens within milliseconds to protect connected equipment.
A: Relay stabilizers offer several key benefits:
The technology is particularly advantageous for general-purpose applications that call for a simple, robust design.
A: Our relay stabilizers can accommodate extremely wide input voltage ranges, with the TRS Series accepting inputs as low as 45V and up to 270V depending on the model. This makes them ideal for areas with severe voltage fluctuations or unreliable power grids. Custom input ranges are also available for specific applications.
A: Our servo voltage stabilizers typically respond to voltage fluctuations within ≤2 seconds, which provides optimal protection for most applications. This response time ensures smooth correction without abrupt changes that could affect sensitive equipment.
A: The main differences are in their technology and performance characteristics. Relay stabilizers use electromagnetic relays to switch between fixed transformer taps, offering ultra-fast response (<60ms), lower cost, and step-wise correction with ±8% typical accuracy. Servo stabilizers use motor-driven mechanical adjustment for smooth, continuous correction with higher precision (±0.5-2%) but slower response (1-2 seconds) and higher cost.
A: We manufacture relay voltage stabilizers from 500VA for small applications up to 20,000VA for larger requirements. Our AVR and TRS series cover the full range, while the portable PR series is available from 500VA to 2,000VA for mobile applications.
A: Our relay stabilizers produce minimal audible noise during normal operation. You may hear a slight clicking sound when relays switch during significant voltage changes, but this is typically much quieter than the mechanical noise produced by servo stabilizer motors. For noise-sensitive environments, we offer models with sound-dampening features.
A: With our high-quality components, YIY relay voltage stabilizers typically provide 8-10 years of reliable service. The solid-state design with no moving parts (except the relays themselves) contributes to this extended lifespan with minimal maintenance requirements.
A: Yes, we provide extensive customization options for relay stabilizers, including specialized input/output voltage parameters, custom housing designs, enhanced protection features, special mounting configurations, and complete OEM/ODM services with your branding.
A: Our standard warranty is 2 years on all relay stabilizer models, with extended warranty options available. We also provide comprehensive after-sales support including installation guidance and technical assistance.
Follow Our Social Media
Use this navigation block to compare relay product families, review factory proof, and download technical materials before selecting a low-cost fast-response solution.